Model NO.: WG96 Power Supply: Rechargeable Battery Charging type: Rechargeable With Light Source: With Light Source IP Rating: IP68 Material: Aluminum Alloy Model Item: Wg96 Operation Voltage: 9V to 13V Reflector: Glossy Aluminum Reflector Body Material: Durable Aircraft-Grade Aluminum Battery: Rechargeable Li- Ion Battery Pack (18650 Battery*6 Trademark: ARCHON Specification: CE, RoHS HS Code: 85131010 Usage: Underwater 100 Meters
Diving Flashlight Switch: Back Push (on/off) Runtime: >6H Battery Type: Lithium Battery Surface Preparation of Reflecting cup: Smooth Certification: CE, RoHS Bulb: Sst-90 LED(Max 2200 Lumens) Color Temperature: 6000 K Lens: 8mm Polycarbonate Board Angle of Light Beam: 8° Hot Spot, 110° Periphery Dimensions: 213.5mm (Length)* 78.0mm (Dia. of Head) Transport Package: EVA Gift Packing. Origin: Shenzhen of Guangdong Product Specifications:
| Model | Archon New Model WG96 Flashlight Rechargeable |
| Bulb | SST-90 LED *1 (max 2200 Lumens) |
| Color temperature | 6500 K (white light) |
| Reflector | 8° hot spot,110° periphery |
| Lens | 8mm Polycarbonate Board; |
| Battery | 18650 rechargeable Li- ion battery *6; |
| Battery Indicator | 100%-50%: Green; 50%-30%: Yellow; 30%-10%:
Red; Below 10%: Red Flashing; Below 5%: switch off; |
| Protection | Polarity reversing protection.
Gas release valve |
BATTERY CHARGING
1. Plug the charger in the wall power socket, the
Indicator Light is green
In the free-load status.
2. Plug the port of the charger in the ports on the light. (the positive and
Negative polar doesn't matter, both ways work. )
3. The indicator light on the charger is red if the battery is not fully
Charged; It will turn green after fully charged.
4. Take out the charger and use the light.
ON/OFF
Push the switch to turn it ON.
MODES CHANGING
Successive push the switch ON-OFF within two seconds to cycle through High, Low, strobe, OFF.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
Contact us if you need more details on LED Torch. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Diving Flashlight、LED Underwater Light. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Underwater Searchlight
